Other Console Main Menu Options; Security Configuration; Firmware Management; Enable Debug Messages - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

4.1.3
Besides the Network Configuration option, the Console Main menu of the KVM s3-1621
and KVM s3-1641 appliances have the following menu items: Security Configuration,
Firmware Management, Enable Debug Messages, Restore Factory Defaults, Reset
Device, and Exit. Each is discussed in the following section.
4.1.3.1
Console Password: Enable or disable the console password using security for the
console (access requires an Admin account).
In the event that you forgot the password, type Help. You will be given a one-time use
key to supply to technical support, who will then supply you with a one-time use
password that you can use to access the Serial Port.
4.1.3.2
This menu contains the Flash Download selection. For more information, see Appendix
5.1 on page 47.
4.1.3.3
This menu option turns on console status messages. Because this can significantly
reduce performance, you should enable debug messages only when instructed to do so
by technical support. When you are finished viewing the messages, press any key to
exit this mode.
4.1.3.4
This menu option will restore all KVM s3-1621 or KVM s3-1641 appliance options to the
default settings.
4.1.3.5
You can use this menu option to initiate a soft reset of the KVM s3-1621 or
KVM s3-1641 appliance.
4.1.3.6
This menu selection will return you to the ready prompt.
590-591-609B
Downloaded from www.Manualslib.com

Other Console Main menu options

Security Configuration

Firmware Management

Enable Debug Messages

Restore Factory Defaults

Reset the KVM s3-1621 or KVM s3-1641 appliance

Exit

manuals search engine
Other Console Main menu options
45