Setting The Keyboard Country Code - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

Basic operations
3.9.6
By default, the KVM s3-1621 and KVM s3-1641 appliances send the US keyboard
country code to USB cables attached to target devices, and the code is applied to the
target devices when they are turned on or rebooted. Codes are then stored in the
KVM-IA. Using a keyboard code that supports a language different from that of the
KVM s3-1621 and KVM s3-1641 appliance firmware will cause incorrect keyboard
mapping.
If multiple keyboards are connected to the local port, they must be of the same type (PC
or Mac) and of the same language.
Issues might arise when you use the US keyboard country code with a keyboard of
another country. For example, the Z key on a US keyboard is in the same location as
the Y key on a German keyboard.
You can use the Keyboard window to send a different keyboard country code than the
default US setting.
Figure 18: Keyboard window
Press Print Screen to start the OSCAR interface. The Main window opens.
Click Setup - Keyboard. The Keyboard window opens.
Select the country code for the keyboard, and click OK. Confirm the change in the
Keyboard Warning window.
Click OK to save the change, or click X or press Escape to exit without saving the
change.
30
Downloaded from www.Manualslib.com

Setting the keyboard country code

manuals search engine
590-591-609B