Attaching An Incompatible Switch Model - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

Installation
•
Connect the other end of the Cat 5 cable to any available ARI port on the rear of the
KVM s3-1621 or KVM s3-1641 appliance.
Turn off and turn on the target devices to the tiered appliances according to the
instructions that are included with that appliance.
Turn off and turn on the tiered appliances to enable its local port to recognize the
KVM-IA.
Repeat steps 1 to 5 for all tiered appliances that you want to attach to the switching
system.
The switching system will automatically merge the two appliances. All target devices
that are connected to the tiered appliances are included in the main KVM s3-1621 or
KVM s3-1641 target device list in the OSCAR interface. However, when an earlier
appliance model is connected to a KVM s2-Adapter PS/2-VGA KVM-IA, the list of
appliances in the OSCAR interface will display both the primary KVM s3-1621 or KVM
s3-1641 appliance port number, followed by a dash, and the secondary appliance port
number. For example, the Port column for a secondary earlier appliance model might
display 01-02, where 01 is the primary port and 02 is the secondary port.
2.9.1
It is possible to attach appliances not listed in the previous table. Incompatible
appliances do not support seamless tiering and devices attached to an incompatible
appliance will not be displayed in the OSCAR menu for the KVM s3-1621 or KVM s3-
1641 appliance. Only the name assigned to the incompatible appliance will be
displayed.
To access an incompatible appliance from the KVM s3-1621 or KVM s3-1641:
Activate the OSCAR interface.
Select the incompatible appliance. The OSCAR menu for the incompatible
appliance will display, and all devices that are attached to the appliance will be
shown in the list of devices.
Select your desired device associated with the incompatible appliance.
You are now connected to that device.
To access the KVM s3-1621 or KVM s3-1641 from an incompatible device:
Activate the OSCAR interface.
Select the desire device on the OSCAR interface associated with the KVM s3-1621
or KVM s3-1641 appliance.
14
Downloaded from www.Manualslib.com
Attach one end of a Cat 5 cable directly to the Analog Console Interface (ACI)
port on the tiered appliance. (If you are unsure if the appliance being tiered has
an ACI port, please consult the Installer/User guide for the tiered appliance.)

Attaching an incompatible switch model

This will activate the OSCAR interface for both the KVM s3-1621 or KVM s3-1641 appliance and the
incompatible appliance.
manuals search engine
590-591-609B