Verifying Ethernet Connections; Configuring The Kvm S3 Client; Adjusting Mouse Settings; Attaching Earlier Appliance Models To A Kvm S3-1621 Or S3-1641 Appliance - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

2.6
The Ethernet connection has two LEDs. The green LED on the right is the Link indicator.
It is lit when a valid connection to the network is established, and it flashes when there is
activity on the port. The amber/green LED on the left indicates that you are
communicating at 100 Mbps (amber) or 1000 Mbps (green) when using the Ethernet
connection.
2.7
See the KVM s3 Client User Guide included on the CD with the software.
2.8
Before a computer connected to the KVM s3-1621 or KVM s3-1641 appliance can
be used for remote user control, you must set the target mouse speed and turn off
acceleration.
If you are experiencing slow mouse response during a remote video session,
deactivate mouse acceleration in the operating system of the target device and set
the mouse speed at 50%.
2.9
You can add earlier appliance models for integration into the existing configuration. In a
tiered system, each ARI port will accommodate one target device. When earlier
appliance models are tiered under the KVM s3-1621 or KVM s3-1641 appliance, the
KVM s3-1621 or KVM s3-1641 appliance must be at the top level of the tier. See the
following list for earlier appliance models that are compatible with the KVM s3-1621 or
KVM s3-1641 appliance configuration:
Table 1 lists earlier KVM appliance models.
Earlier appliance model
KVM s2-0801 (analog)
KVM s2-1602 (analog)
Table 1: Earlier KVM appliance models
Mount the earlier appliance model into the rack according to the instructions that
are included with that appliance.
Perform one of the following actions:
•
590-591-609B
Downloaded from www.Manualslib.com

Verifying Ethernet connections

Configuring the KVM s3 Client

Adjusting mouse settings

Attaching earlier appliance models to a
KVM s3-1621 or s3-1641 appliance
Attach the keyboard, monitor, and mouse connectors of a KVM-IA to the local
port on the tiered appliance and attach one end of a Cat 5 cable to the end of
the KVM s2-Adapter PS/2-VGA KVM-IA.
-or-
manuals search engine
Verifying Ethernet connections
Remote users Local Users
0
0
ARI ports
1 8
1 16
13