Setting Up The Network - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

Installation
Figure 6 illustrates one possible configuration for the KVM s3-1621 or KVM s3-1641
appliance.
Figure 6: Example KVM s3-1621 or KVM s3-1641 appliance configuration
2.1.2
The KVM s3-1621 and KVM s3-1641 appliances and KVM-IAs use IP addresses to
uniquely identify the appliances and the target devices. These appliances support both
Dynamic Host configuration Protocol (DHCP) and static IP addressing. To avoid
confusion, have IP addresses that are reserved for each appliance and remain static
while the appliances are connected to the network. For additional information on setting
up the KVM s3-1621 and KVM s3-1641 appliances using the KVM s3 Client, and for
information on how the KVM s3-1621 and KVM s3-1641 appliances use TCP/IP, see the
KVM s3 Client Installation and User's Guide.
8
Downloaded from www.Manualslib.com
Rack of
target servers
Analog user

Setting up the network

manuals search engine
KVM s3-1621 or KVM s3-1641
appliance
Ethernet
Digital user
Digital user
590-591-609B