Assigning Target Device Names - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

Table 4 describes the options in the Setup window.
Option
Menu
Security
Flag
Language
Devices
Names
Keyboard
Scan
Preempt
Network
Table 4: Setup features to manage routine tasks for the target devices
3.9.1
Use the Names window to identify individual target devices by name rather than by port
number. The Names list is always sorted by port order. Names are stored in the KVM-
IA, so even if you move the cable or target device to another ARI port, the name and
configuration are recognized by the KVM s3-1621 and KVM s3-1641 appliances. If a
target device is turned off, you cannot modify the name of the KVM-IA.
Press Print Screen to start the OSCAR interface. The Main window opens.
Click Setup - Names. The Names window opens.
590-591-609B
Downloaded from www.Manualslib.com
Purpose
Order the list of target devices by target device name, EID number, or
port number. Set a screen delay to specify the length of time that
elapses between when Print Screen is pressed and when the OSCAR
interface starts.
Set passwords to restrict access to the target devices. Enable the
screen saver.
Change the display properties including timing, color, and location of the
status flag.
Specify the language that the interface is displayed in.
Specify the number of ports that are on the attached tiered appliances.
Assign a unique name to each target device.
Specify the keyboard country code.
Set up a custom scan pattern for up to 16 target devices.
Specify preemption settings.
Specify the network speed and configuration, IP address, netmask, and
gateway for the switching system.

Assigning target device names

manuals search engine
Assigning target device names
23