Setting A Screen Delay; Connecting A User To A Target Device; Selecting The Previously Selected Target Device; Disconnecting The User From A Target Device - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

3.3
You can specify the length of time that elapses between when Print Screen is pressed
and when the OSCAR interface starts.
Press Print Screen to start the OSCAR interface.
In the Main window, click Setup - Menu.
In the Screen Delay Time field, type the number of seconds that you want to
elapse between when Print Screen is pressed and when the OSCAR interface
starts.
3.4
Use the Main window of the OSCAR interface to select a target device to which you
want to connect. When you select a target device, the keyboard and mouse are
automatically reconfigured to the correct settings for that target device.
Select a target device by pressing Print Screen to start the OSCAR interface, and
then use one of the following procedures:
•
•
•
3.5
You can toggle between two selected target devices by pressing Print Screen and
then press Backspace.
3.6
Press Print Screen and press Alt+0. A Free status flag in the OSCAR interface
indicates that the user is not connected to a target device.
590-591-609B
Downloaded from www.Manualslib.com

Setting a screen delay

Connecting a user to a target device

In the Main window, double-click the target device name, EID number, or port
number.
-or-
Type the port number, and press Enter.
-or-
Type the first few characters of the target device name or EID number, and
press Enter.
Selecting the previously selected
target device

Disconnecting the user from a target device

manuals search engine
Setting a screen delay
19