Electrical Installation - Electrolux EKK6450AO Benutzerinformation

32 www.electrolux.com
Downloaded from www.Manualslib.com
13.8 Anti-tilt protection
CAUTION!
You must install the anti-tilt pro-
tection. If you do not install it, the
appliance can tilt.
Your appliance has the symbol
shown on the picture (if applica-
ble) to remind you about the in-
stallation of the anti-tilt protection.
Make sure you install the anti-tilt
protection at the correct height.
1. Set the correct height and area for
the appliance before you attach the
anti-tilt protection.
2. Install the anti-tilt protection 77 mm
down from the top surface of the ap-
manuals search engine
pliance and 49 mm from the side of
the appliance into the circular hole on
a bracket (see fig.). Screw it into the
solid material or use applicable rein-
forcement (wall).
3. You can find the hole on the left and
right side on the back of the appli-
ance.
The appliance is delivered with a
left-hand bracket. You can buy a
right-hand bracket at your local
dealer.
Lift the front of the appliance (1) and
put it in the middle of the space be-
tween the cupboards (2). If the space
between the bench cupboards is
larger than the width of the appliance,
you must adjust the side measure-
ment to centre the appliance.
Make sure that the surface behind the
appliance is smooth.

13.9 Electrical installation

The manufacturer is not responsi-
ble if you do not follow the safety
precautions from the chapter
"Safety information".
This appliance is supplied with a main
plug and a main cable.
49 mm
77 mm
2
1