Trouble-Shooting; Storage; Care And Maintenance - Rothenberger SOCKET WELDER P63-S4 Electronic Gebrauchsanweisung

Downloaded from www.Manualslib.com
GB
INSTRUCTION MANUAL

TROUBLE-SHOOTING

If the socket welding device does not operate
correctly, check the following points:
• Check that the unit is connected to a functioning
power source of the correct voltage (230 V / 110 V)
• Check that the temperature regulator is in the
correct position.
If the unit still does not work properly, contact our
local representative or distributor.

STORAGE

When the equipment is no longer going to be used,
you are recommended to turn it off and allow it to
cool in order to store it.
Store it carefully in a locked, dry place out of reach of
children.
PRECAUTION
If the socket welding device is packed into its
storage case while it is still hot, take care to place
it in the correct position.
Incorrect storage could damage the equipment
and the storage case.
Fig. 17 Storing the socket welding device
manuals search engine

CARE AND MAINTENANCE

Inspect the adapters before using them.
Carefully remove any material remaining from
previous welding operations.
PRECAUTION
Do not use metallic items or solvents to remove
residues, as these could damage the surface of
the adapter.
NOTE
Check the condition of the adapters from time to
time, to ensure correct welding.
24