What To Do If - IKEA KYLD Gebrauchsanleitung

ENGLISH
What to do if ...
Caution! Before troubleshooting, disconnect the power supply.
Only a qualified electrician or competent person must do the troubleshooting that is not in
this manual.
Problem
The appliance is too noisy.
(see Notes)
The appliance does not
operate
The inside light does not work
Possible cause
The appliance is not
installed properly.
The storage inside
appliance is not correct.
There might be a
problem with the electric
power supply to the
appliance.
The appliance is
switched off
- The lamp might need
replacing
- The lamp is fixed
incorrectly
Solution
Check if the appliance stands
stable (all the feet should be
on the floor).
Check that:
- The internal components are
correctly placed.
- Bottles and containers are
not in contact with each
other.
Check that:
- there isn't a power supply
failure.
- the power plug is correctly
inserted in the power socket
and the two-pole switch,if
present, is in the correct
position (on).
- the electric circuit safety
devices installed in the
house are fully functional.
- the power supply cable is
not broken.
Switch on the appliance.
Disconnect the appliance
from the power supply, check
the lamp and, if necessary,
replace it with a new one (see
the section "Replacing the
LED").
Disconnect the appliance from
the electric power supply,
check the lamp and screw the
lamp.
12