User Information; Field Of Application; Warranty; Manufacturer Contact Data - HallermannTyton AT2000 CPK Betriebsanleitung

1 User information

These operating instructions are an essential aid for
proper operation of the
AT2000 CPK overhead suspension. They contain
important information and safety instructions to
properly set up the products as well as for their
intended and economical use.

1 .1 Field of application

The operating instructions are directed towards
technicians and the operator. These operating
instructions only apply for the following
AT2000 CPK overhead suspension, referred to in the
following as "overhead suspension" and the
associated Autotool 2000 CPK, referred to as "tool"
in the following.
TYPE
AT2000 CPK overhead suspension
Autotool 2000 CPK

1 .2 Warranty

The warranty complies with the statutory
requirements. Warranty claims are only valid in the
country where the products were purchased.

1 .3 Manufacturer contact data

The manufacturer of the product described in these
instructions is:
HellermannTyton GmbH
Großer Moorweg 45
D-25436 Tornesch
Tel. +49 4122 701-0
www.HellermannTyton.de
Info@HellermannTyton.de
1 .4 Information on the operating instructions
Last change: 13.3.2020

1 .5 Copyright and intellectual property rights

The manufacturer retains the copyright for this
manual. No part of this manual may be reproduced in
any form without the written consent of
HellermannTyton GmbH (called HellermannTyton in
the following), nor may it be processed, duplicated or
distributed using electronic systems.
Actions that violate the aforementioned statements
will require payment of damages.
Operating Instructions • Overhead Suspension AT2000 CPK • 03/2020 • 106-29021

1 .5 .1 Used labels and symbols

In these operating instructions, different labels and
symbols are used in the text. These are explained in
the following:
f Symbol for an instruction
•
1 First step
2 Following steps
; Outcome
Text that is à highlighted in this manner indicates
cross-references.
Article No .

1 .6 Keeping and handing over these instructions

106-00050
These operating instructions must be kept in the
106-00000
immediate vicinity of the workplace and must be
available to all personnel at all times. The operator
must inform the personnel about where this manual
is kept. If the manual should no longer be legible, the
operator must procure a replacement from the
manufacturer.
When the products are handed over or sold to third
parties, the following documents must be handed
over to the new owner:
•
•
•

1 .7 Target group of these instructions

The instructions must be read and observed by all
persons who have been assigned with the following
work:
•
•
•
•
•

1 .8 Applicable documents

f The operating instructions for the Autotool 2000 CPK

1 .9 General information

We reserve the right to make technical changes
without notice.
Symbol for an enumeration
Messages with this symbol contain information about the
environment and how you can help protect it.
Texts with this symbol contain additional information.
this manual
documents regarding repair work
verification of maintenance work
Installation
Operation
Maintenance
Repair
Troubleshooting
must be observed.
User information
4