Charging External Devices - Silvercrest SPB 5.000 A1 - IAN275616 Bedienungsanleitung

Charging external devices

 To charge an external device with your power bank, use the
supplied USB charging cable (B) to connect the power bank
to the external device. To do so, insert the Micro USB plug of
the USB charging cable (B) into the Micro USB socket of
your external device and then connect the USB plug into any
of the two USB ports (1, 2) of your power bank. If the
charging process doesn't start automatically, press the State
of charge / START pushbutton (4) briefly to start the
charging process. Alternatively you can also use the
charging cable of the external device manufacturer (USB
connection). If you want to charge another external device
at the same time, connect it the same way to the other USB
port (1, 2) of the power bank.
During the charging process, the LEDs (5) inform you about the
state of charge of the power bank.
LEDs
All LEDs on
Three LEDs on
Two LEDs on
One LED on
One LED flashes
All LEDs off
SilverCrest SPB 5.000 A1
State of charge
75-100%
50 - 74%
25 - 49%
10 - 24%
1 – 9%
0%
English - 29