Checking The State Of Charge - Silvercrest SPB 5.000 A1 - IAN275616 Bedienungsanleitung

SilverCrest SPB 5.000 A1
LEDs
All LEDs flashing in sequence
One LED on, all other LEDs
flashing in sequence
Two LEDs on, all other LEDs
flashing in sequence
Three LEDs on, the other LED
flashing
All LEDs on
Alternatively, you can charge the power bank
battery with the USB power adapter of your mobile
device
specifications: 5V

Checking the state of charge

You can also check the state of charge of your power bank
when it is not being charged or discharged. To do this, press
the State of charge / START pushbutton (4) briefly. The LEDs
(5) will indicate the state of charge of the power bank for
approx. 20 seconds:
LEDs
All LEDs on
Three LEDs on
Two LEDs on
One LED on
All LEDs off
Please note that the LED indicator only shows an approximate
value of the state of charge of your power bank.
28 - English
if its output
, min. 2.1A
State of charge
0 - 24%
25 - 49%
50 - 74%
75 - 99%
100%
meets the
State of charge
75-100%
50 - 74%
25 - 49%
1 - 24%
0%
following