Exsys MOSCHIP EX-45362IS Bedienungsanleitung Seite 17

EX-45362IS
6. Driver Installation
Windows Server 20xx
After completing the hardware installation, the operating system will automatically the
card and install this! If the driver should not be installed automatically, insert the driver
CD into you CD-ROM drive (eg drive D:) and then open the folder „IO/MOSCHIP/
MCS99xx". Please select the folder with your operating system and install the driver
(see Picture). Follow the hardware assistant and finish the installation. Important! Re-
start your PC in any case after installing the drivers.
Use the following driver for the following Windows Server Version.
Windows Server 2003
Windows Server 2008
Windows Server 2008R2
Windows Server 2012
Windows Server 2012R2
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Ports (COM & LPT)" and at
„Multifunction Adapter" the following new entry's:
If you see this or a similar information the device is installed correctly.
CHANGE PORT NUMBER
If you like to change the port number for example COM3 to COM5, open the „Device
Manager" click at „COM3", „Settings" and then „Advance". There you can change be-
tween COM3 till COM256.
MS-DOS
Please read the manual on the driver CD. You will find the manual in the following folder
„IO/MOSCHIP/MCS99xx/DOS".
LINUX
The required Linux driver are located in the following directory
MCS99xx/Linux".
= XP Driver
= VISTA Driver
= Windows 7 Driver
= Windows 8.x Driver
= Windows 10 Driver
17
English
„IO/MOSCHIP/