Verwandte Anleitungen für Exsys EX-42372IS
Inhaltszusammenfassung für Exsys EX-42372IS
- Seite 1 Bedienungsanleitung Vers. 1.1 / 31.05.13 EX-42372 RS-422/485 Board EX-42372IS RS-422/485 Board Surge Protection & Optical Isolation User Manual...
-
Seite 2: Inhaltsverzeichnis
Deutsch Seriell RS-422/485 PCI Karte Inhaltsverzeichnis Beschreibung ··························································································· 3 Paketinhalt ······························································································· 3 Layout und Jumper Einstellungen ··························································· 4 3.1 Layout ······················································································································· 4 3.2 Octopus-Kabel ··········································································································· 4 3.3 Jumper Einstellungen ································································································ 5 Hardware Installation ··············································································· 6 Treiber Installation ··················································································· 7 5.1 Windows 98/ ME/ 2000/ XP/ Vista/ 7/ 8 und Server 200x ·········································· 7 Windows NT 4.0 ·······································································································... -
Seite 3: Pin Assignments And Cable Wiring
6. Pin Assignments and Cable Wiring 1. Beschreibung Vielen Dank das Sie sich für die RS-422/485 PCI Karte von EXSYS entschieden haben. S1 and S2 Pin connection Sie ist eine Add-On Karte für den PCI-Bus für Desktop, Workstation oder Server um eine High-Speed Datenübertragung herzustellen. -
Seite 4: Layout Und Jumpereinstellungen
Deutsch Seriell RS-422/485 PCI Karte Seriell RS-422/485 PCI Board English 3. Layout und Jumpereinstellungen 5. Driver Installation Note: 3.1 Layout PLEASE DO NOT LET WINDOWS AUTO SEARCH THE DRIVERS ON THE CD, it will cause problems because the INF files will be conflict in this case. Instead, please browse to the correct location (folder) manually to make sure the correct drivers are JP7: chosen and installed correctly. -
Seite 5: Hardware Installation
English Seriell RS-422/485 PCI Board Seriell RS-422/485 PCI Karte Deutsch 4. TXD Control Setting: 3.3 Jumper-Einstellung This jumper is used to select the control signal for the transmitter buffer in RS485 2- Es gibt zwei Jumper-Reihen um die Ports S1 und S2 einzustellen wire mode. -
Seite 6: Jumper Setting
Deutsch Seriell RS-422/485 PCI Karte Seriell RS-422/485 PCI Board English 3.3 Jumper setting 4. TXD Control Einstellung: Dieser Jumper wird verwendet im Mode RS-485 um das Steuersignal des Sender- There are 2 sets of the jumpers to set the settings for port 1 (S1) and port 2 (S2) Puffer zu kontrollieren. -
Seite 7: Layout And Jumpersetting
English Seriell RS-422/485 PCI Board Seriell RS-422/485 PCI Karte Deutsch 3. Layout and Jumpersetting 5. Treiber Installation Anmerkung! 3.1 Layout Bitte lassen Sie Windows nicht automatisch nach den Treibern suchen, da dies wegen den INF Files zu Problemen führen könnte. Stattdessen durchsuchen sie manuell den Treiber an der richtigen Stelle (Ordner) auf der mitgelieferten CD. -
Seite 8: Verdrahtungsübersicht
Pin 1 DATA (-) • 15KV ESD Surge Protection and 2500Vrms Optical Isolation Protection DATA(+) Pin 2 Pin 2 DATA (+) (only for EX-42372IS) • Support Win98/ME, NT4.0, 2000, XP(32/64bit),Vista(32/64bit) Ground Pin 5 Pin 5 Ground Win7(32/64bit), Win8(32/64bit) and Linux RS-422/485 PCI Karte RS-485 Geräte...