Herunterladen Inhalt Inhalt Diese Seite drucken

Care And Cleaning; Troubleshooting - Electrolux EHS30020P Benutzerinformation

Vorschau ausblenden Andere Handbücher für EHS30020P:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CARE AND CLEANING

Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-
ceramic cause no effect on how the
appliance operates.
To remove the dirt:
1. – Remove immediately: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance. Use a special scraper
for the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
– Remove after the appliance is
sufficiently cool: limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.

TROUBLESHOOTING

You cannot activate the appli-
ance or operate it.
An acoustic signal sounds and
the appliance deactivates.
An acoustic signal sounds
when the appliance is deacti-
vated.
The appliance deactivates.
The residual heat indicator
does not come on.
The Automatic Heat Up func-
tion does not operate.
Downloaded from
www.Manualslib.com
Problem
The appliance is not connec-
ted to an electrical supply or it
is connected incorrectly.
You touched 2 or more sensor
fields at the same time.
The STOP+GO function oper-
ates.
There is water or fat stains on
the control panel.
You put something on one or
more sensor fields.
You put something on the sen-
sor field
The cooking zone is not hot
because it operated only for a
short time.
The cooking zone is hot.
manuals search engine
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
Possible cause
.
electrolux 21
Remedy
Check if the appliance is cor-
rectly connected to the electrical
supply (refer to connection dia-
gram).
Activate the appliance again and
set the heat setting in less than
10 seconds.
Touch only one sensor field.
Refer to the chapter "Daily Use".
Clean the control panel.
Remove the object from the
sensor fields.
Remove the object from the
sensor field.
If the cooking zone operated
sufficiently long to be hot, speak
to the service centre.
Let the cooking zone become
sufficiently cool.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis