Basic Operation; Before Starting Playback - Denon DN-C680 Bedienungsanleitung

4 BASIC OPERATION

8
-1
B
PROFESSIONAL CD PLAYER DN-C680
POWER
OPEN/CLOSE
¢ ON £ OFF
LEVEL
PROG. PLAY PROGRAM
ON/OFF
PUSH ENTER
MIN MAX 8
STOP STANDBY/CUE PLAY/PAUSE
PHONES
PRESET
8 6.7
-2

(1) Before Starting Playback

1
Load a disc.
Make the presettings according to the usage purpose.
(See Page 22.)
2
NOTE: Steps 1 and 2 can be performed in the opposite
order.
Select the play mode.
Press the PLAY MODE button.
Single track play
mode
3
Continuous play mode
A-B play mode
NOTE: The A-B play mode cannot be set unless the A and B
points are set.
Select the play finish mode
When the finish mode is selected, the selected button
lights.
FINISH MODE
The stop mode (the servo functions turn off) is set
STOP
when playback finishes.
4
The standby mode is set at the beginning of the next
NEXT
track when playback is finished.
* After the final track is played, the standby mode is
set at the beginning of the first track.
RECUE
When playback is finished, the standby mode is set
at the position at which playback was started.
To standby at the point where the sound begins
Press the AUTO CUE button.
AUTO CUE AUTO CUE
5
Lit
When a track is selected, the position at which the sound
begins is found when a track is cued and the standby mode
is set at that point.
3 9 5 4
FINISH MODE
SEARCH I 6 7 SCAN
IN PLAY MODE END MON AUTO CUE TIME STOP
PITCH REPEAT
9 NEXT
AUTO SPACE INDEX
I A
AUTO EDIT FADER RECUE
B
7
-2 -1
Lit
Lit
Select the track to be played.
Turn the select knob (
8
TRACK NO.
PUSH ENTER
8 9
6 STANDBY/CUE
Flashing during search
The selected track is cued and the standby mode is set.
To select an index number
Press the INDEX button.
INDEX INDEX
The index select mode
is set.
7-
1
Lit
NOTE: The track select mode is set when the button is off.
There is no need to select an index number when
you want to play the track from the beginning.
Turn the select knob (
8
INDEX
PUSH ENTER
8 9
STANDBY/CUE
7-
2
Flashing during search
The selected index number is cued and the standby mode is
set.
If a non-existent index number is selected. Ò No
Index " appears and the index number flashes.
To check the play start position
Press the PLAY/PAUSE button.
PLAY/PAUSE PLAY/PAUSE
8-
1
Lit
Monitor the playback signals to check the play start position.
Press the STANDBY/CUE button.
STANDBY/CUE STANDBY/CUE
8-
2
Flashing
The pickup returns to the play start position and the standby
mode is set. (Back Cue)
To check the play end position
Press the END MON button
END MON END MON
Lit
9
The end is monitored, then the pickup returns to the play
start position and the standby mode is set. (End Monitor)
NOTE: If the STANDBY/CUE button is pressed during the
end monitor operation, the end monitor operation is
canceled, the pickup returns to the play start position
and the standby mode is set.
ENGLISH
).
9
TRACK NO.
STANDBY/CUE
Lit when in standby
).
9
INDEX
STANDBY/CUE
Lit when in standby
Sel.
STANDBY/CUE
Off
STANDBY/CUE
Lit
13