Technical Data; Operation - Geberit Piave Betriebsanleitung

Technical data

The following technical data applies to the Geberit washbasin taps Piave and Brenta for deck and wall-
mounted taps.
Nominal voltage
Mains frequency
Operating voltage
Battery type
Power consumption
Operating pressure
Recommended operating pressure with
thermostatic mixer
Ambient temperature
Storage temperature
Maximum water temperature
Maximum water temperature, short-term
Water temperature, adjustment range with
thermostatic mixer
3)
Flow rate at 3 bar
Does not apply
1)
The battery service life is sufficient for around 200,000 activations.
2)
When used at least 20 times per day on average for a duration of 4 s each, the washbasin tap works in a self-
sustaining manner.
3)
Tap aerators with a flow limitation of 1.3 l/min, 1.9 l/min or 3.8 l/min are available as accessories.

Operation

Releasing the flush
The electronic flush actuation has infrared hand
detection.
1
Hold your hand under the washbasin tap.
✓ Water will start flowing.
45035998285466763-1 © 03-2020
967.455.00.0(02)
Mains operation Battery operation
110–240 V AC
50–60 Hz
4.5 V DC
Alkaline battery
0.1 W
0.5–10 bar 0.5–10 bar
0.5–5 bar
1–40 °C
-20–+70 °C -20 – +70 °C
60 °C
90 °C
20–42 °C
5 l/min
2
Once you have washed your hands, move
your hands away.
✓ The water will stop.
1)
Generator
operation
3 V DC 3.2 V DC
(1.5 V AA)
2–10 bar
0.5–5 bar
1–40 °C 1–40 °C
-20 – +70 °C
60 °C 60 °C
90 °C 90 °C
20–42 °C
5 l/min 5 l/min
EN
2)
13