Troubleshooting; Service Data - JUNO JH071B1 Benutzerinformation

24
How to replace: Lamp
WARNING! Risk of electric
shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety
chapters.
What to do if...
In any cases not included in this table
please contact with an Authorised Service
Centre.
Problem
The oven does not
heat up.
The door gasket is
damaged.
We recommend that you write the data here:
Model (MOD.)
Before you replace the lamp:
Step 2
Disconnect the oven from
the mains.
Check if...
The fuse is blown.
Do not use the
oven. Contact an
Authorised Service
Centre.
Put a cloth on the bottom of
Problem
The display shows
"12.00".
The lamp does not
work.

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity. Do
not remove the rating plate from the oven
cavity.
.........................................
Step 3
the cavity.
Check if...
There was a power
cut. Set the time of
day.
The lamp is burnt
out.