Klarstein TrinityCook Hybrid Bedienungsanleitung Seite 31

EN
Set power level
Touch the power level button to enter power heating mode. The power level
control lamp and the selected cooking zone control lamp above the cooking zone
display (5) are flashing. "0" is shown on the display of the selected cooking zone.
Use the slider to set the desired power level from "1" to "9".
To switch off the selected cooking zone, move the slider to the left with your finger until
the cooking zone display (5) shows "-".
Set temperature
Touch the temperature button to enter temperature heating mode. The temperature
control lamp and the selected induction cooking zone control lamp above the cooking
zone display (5) are flashing. (The radiant hob can't be selected in the temperature
mode.)
Set a temperature between 60 °C and 240 °C with the touch slider.
You can slide to the left side until the selected cooking zone is switched off.
Set timer
Touch the power level button or the temperature button to select the cooking
zone. Then touch the timer button , the timer control lamp lights up and the selected
cooking zone control lamp flashes. Use the plus and minus (+/-) buttons to set a time
between 0-180 minutes. The timer display (8) comes on. When the timer countdown is
over, a beep signal sounds and the induction hob will be switched off automatically.
Activate key lock
Touch the key lock button , a beeping sound will be heard. The key lock control
lamp lights up and the set function is locked. The cooking zone display (5) will show "L"
which indicates it is locked. If you now accidentally touch another button, the induction
hob will not respond unless you touch the On/Off button .
Deactivate key lock
Touch the key lock button for 3 seconds when it is at lock state, a beeping sound
will be heard. The key lock control lamp will be off and all functions can be altered.
31