Program Turn-On And Turn-Off Times; Program Interval Control - Hobby biotherm pro Gebrauchsanweisung

5.4.2 Program turn-on and turn-off times

When " " is flashing, press
(P01 to P08 can be selected using ▲ and ▼)
When "CHA" is flashing, the ▲ and ▼ buttons can be used to select 'CHA' (change) or 'dEL' (delete).
If "CHA" is selected, press
Use the ▲ and ▼ buttons to set the hours between 0 and 23.
button, the turn-on time minute digits "00" will flash.
Press the
Use the ▲ and ▼ buttons to set the minutes between 0 and 59.
button, the turn-on time second digits "00" will flash.
Press the
Use the ▲ and ▼ buttons to set the seconds between 0 and 59.
When "P01 OFF" is flashing, press
The hour digits of the turn-off time "00" will flash.
Use the ▲ and ▼ buttons to set the hours between 0 and 23.
button, the turn-off time minute digits "00" will flash.
Press the
Use the ▲ and ▼ buttons to set the minutes between 0 and 59.
button, the turn-off time second digits "00" will flash.
Press the
Use the ▲ and ▼ buttons to set the seconds between 0 and 59.
If "P02" flashes, you can program further time periods in the same manner.
If you do not wish to set further time periods, press and hold the

5.4.3 Program interval control

Indicator "00:" is flashing.
To adjust interval ON Time,
use the ▲ and ▼ buttons to set the hours between 0 and 23.
button, the minutes digits "00" will flash.
Press the
Use the ▲ and ▼ buttons to set the minutes between 0 and 59.
button, the seconds will flash - "00".
Press the
Use the ▲ and ▼ buttons to set the seconds between 0 and 59.
Press .
12
to program position 1.
to confirm, the turn-on time hour digits "00" will flash.
.
button for a few seconds.