13.0. Drawings with explanation
13.1. Replacement of insulation plates
2.
5.
3.
4.
13.3. Adjusting the feet
13.5. Adjusting the top plate
40
First remove side-
part 1, hereafter
part 2, part 3, part
4 and then part 5.
Mounting the op-
posite way.
1.
Adjusting the feet.
One in each corner
and one in the front
of the firewood com-
partment.
Adjust the 5 feet
accordingly.
Adjusting the top plate is
done by the 4 nuts located
under the top plate.
13.2 Adjusting the doors auto lock
13.4. Adjusting the handle
Remove the split
and tighten the
screw (clockwise)
depending on how
fast the door should
close
Remove the split
and tighten the
screw with a screw-
driver (counterc-
lockwise) depends
on how much spring
power you want in
the handle.