General Information; Contact Address - bürkert AirLINE Field 8653 Kurzanleitung

risk of injury due to unintentional activation and uncontrolled
start-up of the device and system.
▶ Secure the device and system to prevent unintentional
activation.
▶ Ensure that the system does not start up in an uncontrolled
manner.
General hazardous situations.
To prevent injury, observe the following:
▶ Install the device according to the regulations applicable in
the country.
▶ Do not supply aggressive or flammable media to the media
connections of the device.
▶ Do not supply liquids to the media connections of the device.
▶ After the process is interrupted, restart in a controlled man-
ner.
Observe sequence:
1. Connect the power supply.
2. Connect the pneumatic supply (with an external pressure
supply, initially the external auxiliary pilot air [X / 12/14] and
then the medium pressure [P / 1]).
▶ Do not make any changes to the device.
▶ Do not subject the device to mechanical loads.
▶ Observe the general rules of technology.
6
english
Type 8653
Basic safety instructions
note
electrostatically sensitive components and modules.
The device contains electronic components which are suscep-
tible to electrostatic discharge (ESD).
Components which come into contact with electrostatically
charged people or objects are at risk. In the worst case sce-
nario, these components will be destroyed immediately or will
fail after start-up.
▶ Meet the requirements specified by EN 61340-5-1 to mini-
mise or avoid the possibility of damage caused by sudden
electrostatic discharge.
▶ Do not touch electronic components when the supply voltage
is connected.
4

General informaTion

4.1

Contact address

germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Strasse 13 –17
D-74653 Ingelfingen
Phone +49 (0) 7940 - 10 91 111
Fax +49 (0) 7940 - 10 91 448
E-mail: info@burkert.com
international
The contact addresses can be found on the last pages of the
printed Quickstart.
And also on the Internet at: www.burkert.com