probst VH-1/25 Betriebsanleitung Seite 20

General
●
The load (stone slabs) which is to be sucked and
transported, must have sufficient inherent stability,
otherwise there is risk of breakage when lifting!
●
Stone slabs must not be bend when lifting - especially take
care with thin and large-sized stone slabs!
●
Generally, the load (stones slab) is only to be sucked in the
middle, otherwise the load hangs diagonally under the
device and the load could break - especially when lifting
large stone slabs with a small suction plate.
●
Standard suction plates are not suitable for the transport of
glass plates!
5260.0009 V3
4 / 10
GB