WANDERS Square 68 Gebrauchsanweisung Und Montage Seite 24

Target value for the volume of the space to be heated:
Not all spaces meet the present insulating values. According to DIN 18893, the following values can be taken for
the volume of the space to be heated:
If heating circumstances are favourable:
In less favourable circumstances:
In unfavourable circumstances:
For temporary heating you may assume a reduction of 25% for the volume to be heated if the interval is more
than 8 hours.
Table for thickness of insulation cf thickness of the wall
Protection of the wall
Walls made of combustable construction parts
Supporting walls in steel construction
Intergrated pieces against stove
Intergrated pieces in the wall behind
Other walls
Wall thickness < 10 cm
Wall thickness > 10 cm (e.g. a brickwork wall)
▲Table gives the insulation thickness to be used for a given wall thickness to protect intergrated wall.
Table for insulation material.
Please note! Only use products given in the grey-shaded part.
Insulation Packed
no Article no
10 Mineral wool 01
11 Glass wool 02
12 Rock wool 03
13 Waste products
04
05
06
07
08
09
10
99
▲ Select the insulation material from this table. PLEASE NOTE: Group 99 is NOT ALLOWED.
24
Calculate according to DIN 4701
90 m3 (60)
70 m3 (60)
Wall thickness
10 cm
Thermal conduction
Form no packed
Bands 01 Stitched mats
Loose wool Stitched mats
Wool 02 Stitched mats
Granule G. curve 2
Felt
Lamella mat 10 Flakes
G. curve 1
Stitched into 11 Flakes
mats
Plates G. curve 2
Scales
Segments 20 Plates
Interwoven G. curve 1
21 Plates
G. curve 2
Otherwise 99 Single
110 m3 (68)
90 m3 (68)
Insulation
back side
X 8 cm
X
X on the side
X 8 cm
under side
X 6 cm
-
Maximum
appl. temp.
no ºC
10 100
12 120
14 140
16 160
72 720
74 740
76 760
99
140 m3 (75)
120 m3 (75)
Convection
house
X
X
X
X
X
-
Density
no Kg/m3
02 20
03 30
04 40
05 50
06 60
07 70
08 80
09 90
10 100
11 110
12 120
13 130
18 180
99