WANDERS Square 68 Gebrauchsanweisung Und Montage Seite 22

Mounting the Square:
1. Check the packing. If you detect any visible dam-
age, please notify the supplier.
2. Take the stove from the box.
3. Remove the flue collar from the stove by unscrew-
ing the 4 bolts.
4. Place the insert at it's final position. Make sure that
it is positioned right beneath the chimney. If the
fans are installed please make sure the wire does
not crack or break during installation.
5. Connect the flue collar to the flue system with the
upper sections fitting into the lower sections.
6. Place the baffle plate into the stove.
7. Your stove is ready for use.
WANDERS recommends adding extra air inlets with all
built in stoves
22
Repairs
Replacing the glass in the door:
To replace the glass you'll have to unscrew the frame
surrounding the door. This frame is fastened with 4
screws, 2 on top and 2 underneath.
Removing the inside panels:
To remove the inside panels you'll have to remove the
bottom plate first. Now you can take the left, right and
back plate out of the stove.