Designations In The Document; Safety; Intended Use; Important Safety Instructions - SMA NR-SB5GCOM30.BG8 Austauschanleitung

SMA Solar Technology AG
1.7

Designations in the Document

Complete designation
Communication assembly (SB5GCOM)
2

Safety

2.1

Intended Use

This spare-part set enables the replacement of the communication assembly (SB5GCOM) in SMA
inverters.
The product must only be installed in the following SMA inverters:
Spare parts set
NR-SB5GCOM30.BG8
NR-SB5GCOM30.BG81
NR3-SB5GCOM30.BG81
Use SMA products only in accordance with the information provided in the enclosed
documentation and with the locally applicable laws, regulations, standards and directives. Any
other application may cause personal injury or property damage.
Alterations to the SMA products, e.g., changes or modifications, are only permitted with the express
written permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and in most cases terminate the operating license. SMA Solar Technology AG
shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as the
intended use.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient, dry place for future reference and observe all instructions contained therein.
This document does not replace and is not intended to replace any local, state, provincial, federal
or national laws, regulations or codes applicable to the installation, electrical safety and use of the
product. SMA Solar Technology AG assumes no responsibility for the compliance or non-
compliance with such laws or codes in connection with the installation of the product.
If the replacement and all activities stated in this document are carried out by persons who are not
qualified within the meaning of this documentation, this will void the guarantee and warranty claims
and in most cases terminate the operating permit. SMA Solar Technology AG shall not be held
liable for any damage caused directly or indirectly due to such changes by unauthorized persons.
2.2

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS
Replacement Manual
Designation in this document
COM assembly, COM, assembly
Assembly to be replaced
SB5GCOM30.BG8
SB5GCOM30.BG81
Inverters
STP 15000TL-30
STP 20000TL-30
STP 25000TL-30
STP 15000TL-30
STP 20000TL-30
STP 25000TL-30
SB5GCOM-STPTL30-RM-xx-10
2 Safety
7