Introduction; Device Description; Intended Use; Technical Data - Scheppach SG1200 Originalbetriebsanleitung

1. Introduction

Hersteller:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety, use
and disposal. Before using the product, please famil-
iarise yourself with all of the safety information and
instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety information with due care.
We cannot accept any liability for damage or ac-
cidents which arise due to a failure to follow these
instructions and the safety information.
2. Device description (Fig. 1/7)
1. Handle
2. Fuel tank cap
3. Foot
4. Operating bulb
5. Oil check bulb
6. On/off switch
7. Earthing screw
8. 230 V~ socket
9. Choke lever
10. Starter grip
11. Air filter lid
12. Air filter
13. Oil filler plug
14. Low oil trip
15. Spark plug cap
16. Spark plug
17. Fuel tap
18. Fuel filter
A. Oil filler bottle
B. Handle
C. Screwdriver
D. Spark plug spanner
E. Socket wrench
F. Tool bag

3. Intended use

The generator is suitable for devices which use a
230 AC voltage source.
Please check the suitability for use of house hold
devices on the manufacturer information.
The machine may only be utilised for its intended
use.
Any other use is not intended. The user / operator,
not the manufacturer, is liable for resulting damages
or any type of injury resulting from any other use that
is not intended. Please ensure that this device was
not intended for commercial use. We do not accept
any warranty liability if the device is used for com-
mercial, manual, or industrial operations, or activities
similar to these.

4. Technical Data

Generator
Protection type
Continuous output P (S1)
rated
Max. output P (S2/5 s)
max
Nominal voltage U
rated
Rated current I
rated
Frequency F
rated
Type drive motor
Engine displacement
Max. power (motor)
Fuel:
Tank capacity
Engine oil
Use at 2/3 engine load
Weight
Sound pressure level L
pA
Sound power level L
WA
Uncertainty K
Power factor cos ϕ
Performance class
Quality class
Spark plug
Operating mode S1 (long use)
Inverter
IP23M
1000 W
1200 W
230 V~
4,35 A
50 Hz
4 stroke air-cooled
53,5 cm³
2,1 kW/2,85 PS
unleaded fuel
4,2 l
0,25 l
(15W-40)
approx.0,88 l/h
12,8 kg
74 dB(A)
95 dB(A)
1,07 dB (A)
1
G1
B
Torch A7RTC
15/36