Light; Temperature; Wind Speed; Rain - Froggit WH3000SE PRO Bedienungsanleitung

6.4.5 Light

- Press the SET key 12th time to select light unit (lux, fc, w/m2;default:
w/m2).

6.4.6 Temperature

- Press the SET key 13 th time to select in/outdoor temperature unit,
degree C digits will start flashing, press the WIND/+ or PRESSURE/-
key to select unit (C or F; default: C).
- In normal mode, press the TEMP. key to view wind Chill, Heat Index,
Dew Point Temperature. Press the TEMP. key for 5 second, will register
new transmitter.
Note: every 60 second the unit will measure indoor temperature, indoor
humidity and pressure. If temperature is to lower than minimum range,
will display --.-, if it is higher than highest range, will display --.-.

6.4.7 Wind speed

- Press the SET key 14th to select wind speed unit ( km/h, mph, knots,
m/s, bft;default: km/h ).
- In normal mode,press and release the WIND/+ key to view the wind,
gust and wind direction.

6.4.8 Rain

- Press the SET key 15th to select rainfall unit ( inch or mm) the default
mode is mm).
25