Status Screen; Settings Menu - Honeywell Domonial Benutzerhandbuch

STATUS SCREEN

When the keypad is turned off, you can view the current status of the system by pressing OK.
This will display icons and fault messages if any.

SETTINGS MENU

When the system is disarmed, you can access the menu to modify the various
settings of your system.
• The system can have up to 10 users. User 1 has the master code or master
TAG and is the only user authorised to modify all users' CODES and TAGS. All
codes should be different from one another and from other duress codes (+1 to
existing codes).
• It is possible to simplify the arming operation by changing ARM WITH CODE
so the system arms without a code or a TAG.
• You can bypass a detector for one set period if you need to leave a room
without protection by accessing the MANUAL BYPASS menu and selecting a
detector.
• You can customize the arrow keys on your keypad for direct access to
functions in the menu by modifying SHORTCUTS.
• TIME AND DATE can be updated by the user on some systems.
EVENT MENU
You can view EVENTS recorded by the system on your keypad screen.
TEST MENU
To verify the performance of your system, you can test SIRENS and LIGHTS.
You can also initiate a search for mobile keypads out of their base by accessing
SEARCHING TCU.
If your system requires maintenance, your alarm company can request remote
access to your system: enter MAINTENANCE mode to authorize the remote
maintenance.
Downloaded from www.Manualslib.com manuals search engine
- 7 -
E
N
G
L
I
S
H
1 - ANNEX
2 - SILENT MODE
3 - CHIME
4 - MAIL
5 - EVENTS
6 - SETTINGS
7 - TESTS
8 - REMOTE PLUGS
SYSTEM SETTINGS
1 - CODES
2 - TAGS
3 - MANUAL BYPASS
4 - ARM WITH CODE
5 - DATE AND TIME
6 - SHORTCUTS
7 - LANGUAGES
T E S T S
1- SIRENS
2- LIGHTS
3- TRANSMISSION
4- MAINTENANCE
5- SEARCHING TCU
NO YES