Honeywell Domonial Benutzerhandbuch Seite 14

6- How to use the keyfob with 3 LEDs*
ARMING
Press the total or part set** arming button:
The associated LED blinks during communication with the panel and
remains lit for 3 seconds to confirm the system is armed.
If a door or window equipped with contacts is left open, the system cannot be armed.
The disarm LED lights continuously.
Note that with this keyfob arming is immediate. Only arm the system once
you are outside the premises.
DISARMING
Press the disarming button:
ARMING AND DISARMING THE ANNEX SET
If the system is configured for annex arming:
• To arm: Press the Total and Control buttons simultaneously.
• To disarm: Press the Disarm and Control buttons simultaneously.
PERSONAL ATTACK
You can send an instant panic alarm if you feel threatened whilst at home, even
when your system is not armed.
Press the SOS buttons (buttons 2 and 4) simultaneously.
Depending on the configuration, the siren may be triggered.
The ARC is alerted.
* The system can include 0-4 keyfobs of this type.
** Provided that this function has been programmed by the installer, you can choose to protect only a part of your premises whilst
you are in the other part.
Downloaded from www.Manualslib.com
• Close all doors and windows, then try again.
The arming tone is emitted by the panel siren.
The associated LED blinks during the communication with the panel
and then lights for 3 seconds to confirm the instruction.
The disarming tone is emitted by the panel siren. Disarming will
also stop the siren, but it does not interrupt the transmission to the
ARC station.
manuals search engine
- 13 -
E
N
G
L
I
Total set arming
S
H
Part set arming
Disarming
+
Total Contrôl
+
Disarming
Contrôl
+