Keypad Display - Honeywell Domonial Benutzerhandbuch

DURESS CODE
E
A duress code can be used if you are forced to disarm your security system under
N
duress. Your duress code is +1 to your code (1234 => 1235, 6789 => 6780). The
system will disarm as normal however a silent alert signal is transmitted to your
G
Alarm Receiving Centre.
L
INCORRECT CODE PROTECTION
I
If you enter five successive incorrect codes or present five incorrect TAGs, the keypad is
S
blocked for 5 minutes.
H
SENDING A PANIC SIGNAL
You can send an instant panic alarm whenever you feel threatened whilst at home,
even when your system is not armed :
Press the "SOS" keys simultaneously.
The siren is triggered (depending on configuration).
The Alarm Receiving Centre is alerted.

KEYPAD DISPLAY

Your keypad is equipped with a display to ease access to advanced user functions and rich content.
Menu functions are only accessible when the system is disarmed.
The display icons provide a quick view of the system status.
Total set armed
Part set armed
Annex set armed
System disarmed
Annex set disarmed
Receiver 1 ON
Receiver 2 ON
Radio transmission in progress
Silent mode
The navigation keys are used to access the menu:
• Press the arrow keys
brackets "< >",
• Press the
• Press the Return key
Downloaded from www.Manualslib.com
Unread message
Detector activated
Tamper fault
System fault
Bypassed detector
Power supply fault
State of keypad battery
Blinking = replace battery
to enter the main menu, navigate and view choices identified by
key to confirm your choice,
to abort your choice and return to the main menu.
manuals search engine
- 6 -
Code + 1