Inhaltsverzeichnis; Introduction - Husqvarna 115iL Bedienungsanweisung

Introduction..................................................................... 5
Safety..............................................................................6
Assembly...................................................................... 12
Operation...................................................................... 12
Maintenance................................................................. 14
Product description
Husqvarna 115iL is a battery grass trimmer with an
electrical motor.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Product overview
(Fig. 1)
1. Trimmer head
2. Cutting attachment guard
3. Shaft
4. Shaft adjustment (telescope)
5. Loop handle
6. Handle adjustment
7. Keypad
8. Power trigger lockout
9. Power trigger
10. Operator's manual
11. Cord
12. Battery charger
13. Power on and warning indicator
14. SavE button
15. Start/stop button
16. Battery
17. Battery release buttons
18. Battery indicator button
19. Battery status
20. Warning indicator
21. Hex key
22. Plant guard
Symbols on the product
(Fig. 2) WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly. Read the operator's
manual carefully and make sure that you
782 - 005 - 14.10.2020
Contents
Troubleshooting............................................................ 15
Transportation, storage and disposal........................... 16
Technical data.............................................................. 16
Accessories.................................................................. 18
EC Declaration of Conformity....................................... 19

Introduction

Intended use
The product is used with a trimmer head to cut grass.
Do not use the product for other tasks than grass
trimming and grass clearing.
Note: National regulations can set limit to the operation
of the product.
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
(Fig. 13)
(Fig. 14)
understand the instructions before you use
the product.
Use the approved hearing protection and
eye protection.
Maximum speed of the output shaft.
Keep bystanders away.
The product agrees with the applicable EC
directives.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
The product or package cannot be disposed
as domestic waste. Recycle it at a recycling
station for electrical and electronic
equipment (applies to Europe only).
Watch out for thrown objects and ricochets.
Only use a flexible cutting attachment. Do
not use metal cutting attachments.
Do not expose to rain.
Direct current.
Noise emissions to the environment
according to European Directive 2000/14/EC
and New South Wales legislation "Protection
of the Environment Operations (Noise
Control) Regulation 2017". Noise emission
data can be found on the machine label and
in the Technical data chapter.
5