Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Enter the desired position with the
1
0
buttons. Once the
@+
position has been entered, press
the
button to carry out the
absolute jump (in case you have
entered 30:00 for example, the
replay will continue as of the 30th
minute of the recording).
Press the
button to carry out
the absolute jump and to pause the
replay then.
Press the
or
button after
entering the desired position to carry
out a jump as of the current replay
position (in case you have entered
30:00 for example, a jump of 30
minutes will be made in the desired
direction as of the replay position).
By pressing the
button, you set
D
a bookmark at the current replay
position.
Editing a recording
Recorded programs can be
conveniently edited by the remote
control.
This makes it easy for instance to
remove commercial breaks or material
that precedes or follows the desired
program.
The ReelBox features a
function for automatic marking
of commercial breaks. Further
details are given in the section
„Start NoAd" in this chapter.
Opening the recording
To edit a recording, it needs to
be selected and opened at first
in the list display of the recording
directory.
Have the progression bar displayed
by pressing the
button.
OK
Operation
Setting a start marker
Move the green progression bar
with the buttons
,the buttons
or
to the position at which an
B
C
editing marker should be set.
As an alternative, you can make a
jump with indication of the position
data.
By pressing the
button, you
0
@+
set a start marker at the current
replay position. The start marker is
identified by a black triangle above
the progression bar.
Setting an end marker
Navigate to the desired position for
the end marker and press the
button again. The end marker is
identified by a black triangle below
the progression bar.
Repeat the steps for setting a
start or end marker until all desired
editing marks are set.
GB
0
@+
47
Werbung
Inhaltsverzeichnis
