Operation; Videorecorder - Reel Multimedia ReelBox Serie Bedienungsanleitung

Setup functions
Installation
Channel scan
You can search here for channels
automatically or manually.
Software update
CD update
A software update can be carried
out here by an inserted update
CD/DVD if no Internet connection
is available. You can download the
update CD/DVD from
www.reel-multimedia.com/rmm-
english/download.html or get it
from your electronics retailer.
Online update
You download the most current
software for your device here
automatically.
Prerequisites: The device is
connected to the Internet.
NetCeiver DiSEqC
You can check all tuner settings
to the DVB platform NetCeiver
integrated in the ReelBox and
make settings for the digital
control system of your satellite
system.
Installation wizard
Refer to initial installation.
Tuners in use
Set the number of antenna tuners
here (DVB-S, DVB-C, DVB-T) (for
dual tuners, up to 6 are possible).
Disable Bluetooth support
The Bluetooth connection to the
ReelBox is switched on and off.
Enable Eject on DeepStandby
You specify here whether the disk
is ejected after the ReelBox has
been switched into standby mode.
Enable DeepStandby
Enable DeepStandby
You specify here whether the
ReelBox should be switched into
standby mode after a specified
duration. If you select „0" here,
then the ReelBox switches directly
into deep-standby mode and not
only into standby mode.

Operation

Go to DeepStandby after (h)
You specify here the length of the
duration after which the ReelBox
should be switched into standby
mode.
Network
Network settings are made here e.g.
for Ethernet, WLAN or Windows
network connections
Audio / Video
Make settings here for audio/video,
for example:
Dolby Digital
Analog Audio
Video mode
Screen width-to-height
ratio (4:3 or 16:9)
Resolution
OSD scaling
Video recorder
Make settings here for the built-in hard
drive recorder, for example:
Recording settings
Replay settings
Start NoAd after a recording
Use external harddisk for
recording
GB
29