Care And Maintenance - Axkid Bigkid 2 Bedienungsanleitung

Removing Axkid One car seat from your vehicle
To remove the Axkid Bigkid from the vehicle, press both ISOFIX buttons to release the Axkid Bigkid from the ISOFX
connection points and lift the seat out of the vehicle. To remove the ASIP, push the button on the ASIP and remove.

Care and maintenance

• The Axkid Bigkid cover can be removed and washed in a washing machine at 30o C on the "Gentle Cycle"
program. Do not put the cover in a dryer as this can damage the cover and the padding may separate from
the fabric.
• Removing and refitting the seat covers.
o
Raise the headrest to its highest position to allow for more room to work.
o
Start with the base cover and remove the elastic loops from their hooks and remove the base cover.
o
Headrest cover: remove the elastic loops from their hooks and remove the head cover.
o
Side-wing covers: pull the cover from the top of the wing and then down and off.
o
Repeat on the other wing.
o
To refit the seat covers: reverse the above steps.
o
Visit www.axkid.com to find videos explaining how to remove and attach the cover.
• Any plastic parts of Axkid Bigkid can be cleaned with mild detergent and water. Do not use aggressive
chemicals containing solvents etc., as this can cause damage to the plastic and compromise the safety of the
Axkid Bigkid.
• All materials used in Axkid Bigkid are recyclable and should be recycled as per your local legislation. Ask your
local recycling center for advice when recycling this product.
• Do not make any modifications or alterations to Axkid Bigkid other than those described in this instruction
manual. Follow the instructions in this manual carefully. Any repairs must be carried out by the manufacturer
or agent.
• If the seat cover needs replacing, ensure only original products from Axkid are used. If other products are used,
the Axkid Bigkid safety system may be compromised and could lead to severe injury in case of an accident.
Warranty
Axkid Bigkid is covered by a 24-month warranty from date of purchase. Ensure you save your receipt and bring it to your
place of purchase if you have any warranty issues.
The warranty does not cover:
• Normal wear and tear
• Damage due to incorrect use, neglect, or accident
• If repairs have been carried out by a third party
• All materials used have a very high UV-resistance rating. However, UV-light is very aggressive and will ultimately
lead to fading of the seat cover. This is not covered by our warranty as it is considered normal wear and tear.
11