Installation Instruction - Respekta CH 22098 IXB Installations & Bedienungsanleitung

English
The cooker hood should be placed at a distance of 65~75cm above the cooking surface for best effect
(Pic 1).
1. Once the installation height is determined, install hooks (1) and (2) in a suitable location and keep
them in line. The fixed position of the internal chimney bracket is the place of the chimney. See (Pic 2).
2. Fix the outside chimney bracket on the outside chimney, and be sure that the inside chimney can
be adjusted the height in it freely as well as fixing the expansion pipe. Afterwards, install the expansion
pipe and chimney on the cooker hood. Fix the expansion pipe with a cable tie on the outlet.See Pic
3/Pic4.
3. Hang the hood body on the hook (2). See pic 5.
2
4. Pull out the inner chimney to the position of the inner chimney bracket (1) and fix it with screws (Pic
7). Then fasten the body with safety screws (Pic 6). Note: The two holes for the security screws are 6
mm in diameter at the back inside the housing.
Attention! For a properly fuction of the hood, it
must be aligned horizontally.
fi200917at

18. Installation Instruction

1
13
1
2
GB