Start-Up; Switching On/Off; Display Backlight - Parkside PZM 2 A1 Bedienungs- Und Sicherheitshinweise

NOTES:
Before opening the battery compartment:
–Switch off the product .
–Remove both test probes 9 from any circuit .
If 20 is shown in the display 6 : Replace
the batteries .
˜ Start-up
˜ Switching on/off
Switching on: Turn the rotary knob 3 in a
clockwise direction away from OFF to any
other position . The display 6 switches on .
Switching off: Turn the rotary knob 3 to OFF .
The display 6 switches off .
˜ Display backlight
Backlight on: Press and hold HOLD 5 for
2 seconds .
Backlight off: Press and hold HOLD 5 for
2 seconds again .
The backlight automatically turns off after
approx 15 seconds .
˜ Automatic power off
Automatic power off is activated when
shown in the display 6 .
If the product is idle for more than approx .
15 minutes, the product automatically changes
to sleep mode .
48 GB/IE
14 is