Parkside PZM 2 A1 Bedienungs- Und Sicherheitshinweise Seite 44

The voltage between the meter connection
points and earth must never exceed
600 V DC/AC in CAT III .
Exercise particular caution when dealing with
voltages exceeding 33 V/AC or 70 V/DC .
Touching electrical conductors at these
voltages may result in a fatal electric shock .
To prevent an electric shock, do not touch the
measuring points while taking measurements,
either directly or indirectly . While taking
measurements, do not grip beyond the finger
guards on the test probes .
Check the product and test probes for signs
of damage before each measurement . Never
take measurements if the protective insulation
is damaged .
Do not use the product before, during or after
a storm (risk of electric shock/power surge) .
Ensure that your hands, shoes, clothes, the
floor, circuit and circuit components are dry .
Avoid using the product in the immediate
vicinity of:
–Strong magnetic or electromagnetic fields
–Transmitting antennas or HF generators .
44 GB/IE