Safety Warnings; Personal Protective Equipment - DeVilbiss COM-P22 31 Gebrauchsanleitung

Solvents and coating materials
can be highly flammable or
combustible when sprayed. ALWAYS
refer to the coating material suppliers
instructions
before using this equipment
Users must comply with all local
and national codes of practice
a n d
r e q u i r e m e n t s
ventilation, fire precautions, operation
and house-keeping of working areas
spraying process and by cleaning non-
conductive parts with cloths. To prevent
ignition sources from static discharges,
earth continuity must be maintained to
the spraygun
equipment used. It is essential to use
conductive air and/or fluid hoses.
Always read all labels and safety data
sheets for the material before spraying
and follow any recommendations. If In
Doubt, Contact Your Material Supplier
The use of respiratory protective
equipment is recommended at all
times. The type of equipment
must be compatible with the material
being sprayed.
Downloaded from www.Manualslib.com

SAFETY WARNINGS

Fire and explosion
and COSHH
i n s u r a n c e
g o v e r n i n g
This equipment, as supplied,
is NOT suitable for use with
Halogenated Hydrocarbons.
Static Electricity
generated by fluid and/or air
passing through hoses, by the
and other
Personal Protective
Equipment
Toxic vapours – When sprayed,
certain materials
poisonous, create irritation or be
otherwise harmful to health.
manuals search engine
Always wear eye protection when
spraying or cleaning the spraygun
Gloves
spraying
equipment
sheets
Training – Personnel should be given
adequate training in the safe use of
spraying equipment.
c o m p a n y
Never aim a spraygun at any part of the
body
Never exceed the max. recommended
safe working pressure for the equipment
The fitting of non-recommended or non-
original spares may create hazards
can be
Before cleaning or maintenance, all
pressure must be isolated and relieved
from the equipment
The product should be cleaned using a
gun washing machine. However, this
equipment should not be left inside gun
metallic
washing machines for prolonged periods
of time.
Noise Levels
The A-weighted sound level of
sprayguns may exceed 85 dB
(A) depending on the set-up
may be
being used. Details of actual noise levels
are available
recommended that ear protection is worn
at all times when spraying.
Spray Equipment using high pressures
may be subject to recoil forces. Under
certain circumstances, such forces could
result in repetitive strain injury to the
operator.
3
must be worn when
or cleaning the
Misuse
on request.
Operating
© 2003 ITW Finishing Systems and Products
E
E
It is