Ec Declaration Of Conformity - DeVilbiss COM-P22 31 Gebrauchsanleitung

E
E
Read and follow all instructions and Safety Precautions before using this
The Compact pressure feed Spraygun Kit is complies to ATEX regulations 94/9/EC, protection level;
Important:
not designed for use with highly corrosive and/or abrasive materials and if used with such materials it
must be expected that the need for cleaning and/or replacement of parts will be increased. If there is
any doubt regarding the suitability of a specific material contact your local Distributor or ITW Finishing
direct.
Example:
Aircap

EC Declaration of Conformity

We: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spraygun model Compact, declare, under our sole responsibility, that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
protection requirements of Council Directive 98/37/EC relating to Machinery Safety Directive,
and;
Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
ITW Finishing Systems and Products reserve the right to modify equipment specification with-
out prior notice.
© 2003 ITW Finishing Systems and Products
Downloaded from www.Manualslib.com
Operation Manual
Advanced Conventional
Pressure Feed Spraygun
II 2 G X, Suitable for use in Zones 1 and 2
These Sprayguns are suitable for use with solvent based materials. These guns are
Model Part Number
COM-P430-14
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective
manuals search engine
Important
equipment
Description
Fluid nozzle size
(14 = 1,4 mm)
2
B. Holt, General Manager
30th June 2003