Installation Of The Oven - Pkm EBO8 DPY Bedienungsanleitung

with a bubble level.
7. Remove the complete packaging material (inside and outside the appliance)
before initial operation.
8. Connect the appliance to the mains properly. Only use a proper grounded safety
socket for connection (s. chapter 2.3 E
9. Manufacturing residues or oil having remained in the appliance or on the heating
element may cause some odours and smoke emission. These are normal
operational parameters, which will disappear after a number of uses. Open the
room door or a window to ensure proper ventilation.
10. The nameplate is situated inside the appliance or at the back.

2.2 Installation of the oven

DANGER!
household power supply) before you install the appliance and before
you connect it to the mains. RISK OF ELECTRIC SHOCK!
❖ All dimensions in the following figures are given in millimetres.
Use the embedded handles or wire handles
the appliance (s. fig. in chapter 3.1 O
The built-in furniture must stand in a stable position and need to be securely
fastened.
A gap of 5 mm must remain between the appliance and the surrounding sides of
the built-in furniture.
The power cord must not be trapped or kinked.
If the oven will be installed above a drawer of the built-in furniture, a fixed
intermediate shelf must be mounted between the oven and the drawer.
1. Switch off the power supply (fuse box of your household power supply).
2. Provide an installation opening meeting the dimensions on the following
drawings (s. below, fig. 1 and fig. 2 / depending on the built-in furniture).
Depending on model.
22
Switch off the power supply (fuse box of your
I
NSTALLATION
LECTRICAL CONNECTION
22 on both sides of the oven to move
).
VEN
~ ~
71
).