Herunterladen Inhalt Inhalt Diese Seite drucken

Ferrari Fast Block 3 Serie Bedienungs- Und Wartungsanleitung Seite 84

Inhaltsverzeichnis

Werbung

3ª Serie / 3
Series / 3. Serie
rd
IT
CONTROLLO vISIvO
IMPIANTO IDRAULICO
Controllare il livello del serbatoio idraulico ed eventuali
perdite, tubi flessibili usurati o tubazioni danneggiate.
Controllare, durante il periodo di rodaggio, le guar-
nizioni dei tubi oleodinamici, in quanto potrebbero
presentarsi delle piccole perdite dovute all'assesta-
mento delle guarnizioni coniche; in tal caso stringere
i raccordi in modo adeguato.
In caso di sostituzione delle tubazioni
effettuare un'accurata pulizia delle stes-
se prima del montaggio. Impurità inter-
ne o polveri danneggerebbero l'impianto
idraulico in modo irreparabile.
CONTROLLO PNEUMATICI
• Verificare la pressione di gonfiaggio.
• Controllare se presentano tagli, usura, oggetti
estranei nel battistrada.
• Verificare infine se vi sono bulloni allentati o mancanti.
PULIZIA GRUPPO NASTRO
TRASPORTATORE
• è indispensabile pulire più volte al giorno con l'ap-
posita pistola ad aria il nastro trasportatore (A) su
tutta la sua lunghezza, rulli di trascinamento, spon-
de, ed anche l'interno del vomere.
84
TRAPIANTATRICE TRAINATA
TOWED TRANSPLANTING MACHINE
GEZOGENE PFLANZMASCHINE
TRASPLANTADORA REMOLCADA
Manuale d'uso e manutenzione
Operating and service manual
Bedienungs- und Wartungshandbuch
Manual de uso y mantenimiento
EN
vISUAL CHECK OF
HyDRAULIC SySTEM
Control the oil level of the hydraulic tank and possi-
ble oil leaks, flexible worn pipes or damaged pipes.
Control, during the run-in period, the seals of the oil-
pressure pipes, because there can be some leaks due
to the conic seals adjustment; in this case fasten the
joints in the right way.
If the piping must be replaced you have
to clean it carefully before mounting
them. Inside impurity or dust can dama-
ge the hydraulic system in a irretrievable
way.
TyRES CHECK
• Check the inflation pressure.
• Check for any cuts, wear, foreign bodies in the tre-
ad.
• Lastly, check for any loose or missing bolts.
CLEANING OF CONvEyOR
BELT UNIT
• Use the appropriate air pistol to clean the conveyor
belt (A) many times a day long its entire length, as
well as the dragging rollers, edges, and also the
inside of the ploughshare.
A

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis