Care And Maintenance; Waste Disposal - TFA 30.3045.IT Betriebsanleitung

To wall mount:
1.
2.
Note:
Before permanently fixing the thermo-hygro
transmitter to the wall base, pace all units in the
desired locations to check that the outdoor
temperature and humidity readings are receivable. In
event that the signal is not received, relocate the thermo-hygro
transmitter or the Wireless thermo-hygrometer slightly as this
may help the signal reception.

CARE AND MAINTENANCE


Clean the instrument and the transmitter with a soft damp
cloth. Do not use solvents or scouring agents.

Remove the batteries if you do not use the product for a
lengthy period.
MALFUNCTION
Problems
No indication on
the base unit
No transmitter
reception
Display "---"
Incorrect display

WASTE DISPOSAL

This product has been manufactured using high-grade
materials and components which can be recycled and reused.
Secure the bracket onto a desired wall using
the screws and plastic anchors.
Clip the transmitter onto the bracket.
Troubleshooting

Ensure batteries polarity are
correct

Change batteries

Check batteries of external
transmitter (do not use
rechargeable batteries!)

Restart the transmitter and base
unit as per the manual

Choose another place for the
transmitter and/or the base unit

Reduce the distance between the
transmitter and the base unit

Check if there is any source of
interference

Change batteries
Never throw flat batteries and rechargeable
batteries in household waste.
As a consumer, you are legally required to take
25