Balluff BIS C-60 Serie Handbuch Seite 71

C60_1-029_0108_en.p65
65
Mounting the
BIS C-6021
processor
66
Opening the
BIS C-6021
processor
Connection diagram
for BIS C-6021
processor
Connection locations
and names
66 E
BIS C-6021
Mounting Processor
The processor is mounted using 4 M4 screws.
X1
X2
X3
60 ca. 20
BIS C-6021
Opening the processor / Interface information
To convert the processor for the power supply via the installation remote bus instead of sup-
plying it via X1, the internal connections have to be changed.
Ensure that the device is turned off. Remove the 4 screws on the BIS C-6021 and lift off the
cover. Conversion see the following
Connection for read/write head 2
Digital input,
X1
power supply for
ST9 remote bus version
I B output
NTER US X2
I B input X3
NTER US
Service interface
Head 2 Head 1
M4
X4
63
100
.
Head 2 Head 1
Connection for read/write head 1
Be sure before
opening that the
unit is disconnected
from power.
Mounting of the cover
(4 screws),
max. permissible tightening
torque: 0.15 Nm
X4
Function ground FE
E 65