Balluff BIS C-60 Serie Handbuch Seite 58

C60_1-029_0108_en.p65
39
Example No. 6
For configuring with
double bit header!
40
Example No. 7
Store Mixed Data
Access program
For configuring with
double bit header!
40 E
Function Description
Examples for protocol sequence
Write 16 bytes starting at code tag address 20 (code tag type with 32 byte block size):
Host:
1.) Process subaddresses of the output buffer in the
order shown:
3.) Process subaddresses of the output buffer:
5.) Process subaddresses of the output buffer:
7.) Process subaddresses of the output buffer:
9.) Process subaddresses of the output buffer:
Function Description
Examples for protocol sequence
Storing a program for reading out 3 data records:
1st data record Start address
2nd data record Start address
3rd data record Start address
Total number of bytes exchanged in the operation:
All 104 bytes are written for the programming.
Host:
1.) Process subaddresses of the output buffer in the
order shown:
3.) Subadressen des Ausgangspuffers bearbeiten:
BIS C-60_1 Identification System:
2.) Process subaddresses of the input buffer in the
order shown:
4.) Process subaddresses of the output buffer:
6.) Process subaddresses of the output buffer:
8.) Process subaddresses of the output buffer:
10.)Process subaddresses of the input buffer:
5 Number of bytes 7
75 Number of bytes 3
312 Number of bytes 17
27 bytes
Host:
2.) Process subaddresses of the input buffer:
4.) Subadressen des Eingangspuffers bearbeiten:
E 39
Continued on next .