Balluff BIS C-60 Serie Handbuch Seite 61

C60_1-029_0108_en.p65
45
Example No. 10
For configuring with
double bit header!
46
Example No. 11
For configuring with
double bit header!
46 E
Function Description
Examples for protocol sequence
Put the relevant read/write head into ground state:
Both read/write heads can be independently set to the ground state.
Host:
1.) Process subaddresses of the output buffer:
3.) Process subaddresses of the output buffer:
Function Description
Examples for protocol sequence
Program configuration data:
Configuration data can be programmed in both buffers - for Head 1 and Head 2 - as desired.
Host:
1.) Process subaddresses of the output buffer in the
order shown:
3.) Process subaddresses of the output buffer:
5.) Process subaddresses of the output buffer:
BIS C-60_1 Identification System:
2.) Go to ground state;
Process subaddresses of the input buffer:
4.) Process subaddresses of the input buffer:
BIS C-60_1 Identification System:
2.) Process subaddresses of the input buffer in the
order shown.
4.) Process subaddresses of the output buffer:
6.) Process subaddresses of the input buffer:
E 45