Operation; Switching On/Off - Silvercrest SHGD 35D A1 Bedienungsanleitung

Operation

Switching on/off
NOTE
► The hotplates
(see section "Cleaning").
The appliance is secured with the catch
Press the hotplates
Now you can open the hair straightener all the way.
1) Insert the plug into a mains power socket.
2) Push the ON/OFF switch
cator light
3) Select the temperature suitable for your hair by turning the temperature
control
–
–
NOTE
► Select a high temperature for thick and strong hair.
► Select a lower temperature for fine and thin hair.
► If you are unsure, start with a lower temperature and increase the tempera-
ture until you find the ideal temperature for you.
4) As soon as the hair straightener has reached the set temperature, the indicator
lamp
5) When you have finished styling your hair, push the ON/OFF switch
wards into the "0" (OFF) position. The indicator light
Pull out the plug and allow the appliance to cool down completely.
SHGD 35D A1
must be free of dirt. Clean them before use if required
together and pull the catch
starts to flash red and the appliance starts to heat up.
:
Turn the temperature control towards MIN to reduce the temperature.
Turn the temperature control towards MAX to increase the temperature.
will light up permanently red.
.
forwards into the "1" (ON) position. The indi-
out.
back-
goes out.
GB │ MT │ 31 ■