Appliance Description; Before Straightening; Operation; Preparation - Silvercrest SHGD 40 C1 Bedienungsanleitung

Appliance description

GB

Before straightening

Operation

Preparation

6
Downloaded from www.Manualslib.com
1 Display
2 Temperature button
3 On/Off button
4 Locking device
5 Suspension loop
6 Hotplates
■ The hair should be clean, dry and free of styling products. Excepted are the
special products that support a straightening of the hair.
■ Comb the hair thoroughly before straightening so that there are no knots in it.
NOTICE
The hotplates 6 must be free from contamination of all kinds. If necessary,
►
clean them before taking them into use (see chapter "Cleaning").
The appliance is locked, the locking device 4 is pressed in on the side
1) Insert the plug into a mains power socket.
2) Press and hold the On/Off button 3 until the display 1 is illuminated. The
display 1 shows the programmed temperature. The colour of the display 1
indicates whether the temperature has already been reached:
–
red: the temperature has not yet been reached.
–
blue: the programmed temperature has been reached.
3) Select the appropriate temperature for your hair:
–
130 - 140°C, minimum heat level, for very fi ne hair.
–
140 - 160°C, low heat level, for fi ne hair.
–
160 - 180°C, medium heat level, for normal hair.
–
180°C- MAX, highest heat level, for thick or diffi cult to shape hair.
Press the temperature button 2 on the side marked "+" to increase the
temperature. Press the temperature button 2 on the side marked " -" to
reduce the temperature.
manuals search engine
.
SHGD 40 C1