Before Straightening; Operation; Switching On/Off - Silvercrest SRH 240 A1 Bedienungsanleitung

Before straightening

■ The hair should be clean, dry and free of styling products. The only exception
to this are special products which facilitate hair straightening.
■ Comb the hair thoroughly before straightening so that there are no knots in it.

Operation

Switching on/off
NOTE
► The appliance will only heat up if the hotplates
indicator lamp
ON/OFF switch
► The hotplates
(see section "Cleaning").
The appliance is secured with the catch
Press the hotplates
Now you can open the hair straightener.
1) Insert the plug into a mains power socket.
2) Pull the two hotplates
3) Push the ON/OFF switch
switches on. The appliance heats up. After about 3 minutes, the hair straight-
ener has heated up.
4) When you have finished styling your hair, push the ON/OFF switch
the "0" (off) position. Pull out the plug and allow the appliance to cool down
completely.
5) Pull the two locking buttons
the two hotplates
■ 26 │ GB │ MT
will light up even if the hotplates
is set to "I".
must be free of dirt. Clean them before use if required
.
together and pull the catch
out completely.
to the "I" (on) position. The indicator lamp
in the direction of the arrow, so you can push
back in evenly.
are pulled out. The
are pushed in if the
out.
to
SRH 240 A1